Home | Contents | 日本語

CHAPTER 10

Papers

Latest papers

  1. Towards Dynamic Calibration of Force Transducers: Self Error Correction Using the Second Derivative of Sensor Output
    Y. Fujii — Experimental Techniques, 2025. https://doi.org/10.1007/s40799-025-00860-y (free read: https://rdcu.be/eVmFA) → Ch. 5
  2. Noise-Robust Frequency Estimation via Overlapped Sampling-Intervals Zero-Crossing Fitting
    P. Youplao, N. Pornsuwancharoen, Y. Fujii — IEEE Transactions on Instrumentation and Measurement (Online first), 2026. https://doi.org/10.1109/TIM.2026.3693432 → Ch. 9

Main papers on the LMM (1999–2014)

  1. Y. Fujii, H. Fujimoto, S. Namioka, "Mass measurement under weightless conditions", Rev. Sci. Instrum., Vol.70, No.1, pp.111–113, 1999.
  2. Y. Fujii, H. Fujimoto, "Proposal for an impulse response evaluation method for force transducers", Meas. Sci. Technol., Vol.10, No.4, pp.N31–N33, 1999.
  3. Y. Fujii, H. Fujimoto, "Measurements of frictional characteristics of a pneumatic linear bearing", Meas. Sci. Technol., Vol.10, No.5, pp.362–366, 1999.
  4. Y. Fujii, K. Ogushi, T. Tojo, "A proposal for a dynamic-response-evaluation method for torque transducers", Meas. Sci. Technol., Vol.10, No.12, pp.N142–N144, 1999.
  5. Y. Fujii, D. Isobe, S. Saito, H. Fujimoto, Y. Miki, "A method for determining the impact force in crash testing", Mech. Syst. Signal Process., Vol.14, No.6, pp.959–965, 2000.
  6. Y. Fujii, H. Fujimoto, R. Watanabe, Y. Miki, "Balance for measuring mass under microgravity conditions", AIAA Journal, Vol.39, No.3, pp.455–457, 2001.
  7. Y. Fujii, "Measurement of impulse response of force transducers", Rev. Sci. Instrum., Vol.72, No.7, pp.3108–3111, 2001.
  8. Y. Fujii, "Dynamic three-point bending tester using inertial mass and optical interferometer", Opt. Lasers Eng., Vol.38, No.5, pp.305–318, 2002.
  9. Y. Fujii, "Measurement of steep impulse response of a force transducer", Meas. Sci. Technol., Vol.14, No.1, pp.65–69, 2003.
  10. Y. Fujii, "Evaluation of impulse response of commercial force transducers", Measurement, Vol.33, No.1, pp.35–45, 2003.
  11. Y. Fujii, "A method for calibrating force transducers against oscillation force", Meas. Sci. Technol., Vol.14, No.8, pp.1259–1264, 2003.
  12. Y. Fujii, "Proposal for a step response evaluation method for force transducers", Meas. Sci. Technol., Vol.14, No.10, pp.1741–1746, 2003.
  13. Y. Fujii, "Measurement of force acting on a moving part of a pneumatic linear bearing", Rev. Sci. Instrum., Vol.74, No.6, pp.3137–3141, 2003.
  14. Y. Fujii, T. Yamaguchi, "Method for evaluating material viscoelasticity", Rev. Sci. Instrum., Vol.75, No.1, pp.119–123, 2004.
  15. Y. Fujii, "An optical method for evaluating frictional characteristics of linear bearings", Opt. Lasers Eng., Vol.42, No.5, pp.493–501, 2004.
  16. Y. Fujii, T. Yamaguchi, "Optical method for evaluating material friction", Meas. Sci. Technol., Vol.15, No.10, pp.1971–1976, 2004.
  17. Y. Fujii, "Microforce materials tester", Rev. Sci. Instrum., Vol.76, No.6, 065111, 2005.
  18. Y. Fujii, T. Yamaguchi, "Proposal for material viscoelasticity evaluation method under impact load", J. Mater. Sci., Vol.40, No.18, pp.4785–4790, 2005.
  19. Y. Fujii, "Pendulum for precision force measurement", Rev. Sci. Instrum., Vol.77, No.3, 035111, 2006.
  20. Y. Fujii, "Measurement of the electrical and mechanical responses of a force transducer against impact forces", Rev. Sci. Instrum., Vol.77, No.8, 085108, 2006.
  21. Y. Fujii, J. Valera, "Impact force measurement using an inertial mass and a digitizer", Meas. Sci. Technol., Vol.17, No.4, pp.863–868, 2006.
  22. Y. Fujii, "Method of evaluating the dynamic response of materials to forced oscillation", Meas. Sci. Technol., Vol.17, No.7, pp.1935–1940, 2006.
  23. Y. Fujii, K. Shimada, "Instrument for measuring the mass of an astronaut", Meas. Sci. Technol., Vol.17, No.10, pp.2705–2710, 2006.
  24. Y. Fujii, "Method for generating and measuring the micro-Newton level forces", Mech. Syst. Signal Process., Vol.20, No.6, pp.1362–1371, 2006.
  25. Y. Fujii, "Frictional characteristics of an aerostatic linear bearing", Tribol. Int., Vol.39, No.9, pp.888–896, 2006.
  26. Y. Fujii, T. Yamaguchi, "Method of evaluating the force controllability of human finger", IEEE Trans. Instrum. Meas., Vol.55, No.4, pp.1235–1241, 2006.
  27. Y. Fujii, T. Yamaguchi, J. Valera, "Impact response measurement of a human arm", Exp. Tech., Vol.30, No.3, pp.64–68, 2006.
  28. Y. Fujii, "Method for correcting the effect of the inertial mass on dynamic force measurements", Meas. Sci. Technol., Vol.18, No.5, pp.N13–N20, 2007.
  29. Y. Fujii, "Microforce materials tester based on the levitation mass method", Meas. Sci. Technol., Vol.18, No.6, pp.1678–1682, 2007.
  30. Y. Fujii, "Method of generating and measuring static small force using down-slope component of gravity", Rev. Sci. Instrum., Vol.78, No.6, 066104, 2007.
  31. Y. Fujii, "Impact response measurement of an accelerometer", Mech. Syst. Signal Process., Vol.21, No.5, pp.2072–2079, 2007.
  32. Y. Fujii, "Method for measuring transient friction coefficients for rubber wiper blades on glass surface", Tribol. Int., Vol.41, No.1, pp.17–23, 2008.
  33. Y. Fujii, D.W. Shu, "Impact force measurement of an actuator arm of a hard disk drive", Int. J. Impact Eng., Vol.35, No.2, pp.98–108, 2008.
  34. Y. Fujii, K. Shimada, "The space scale: An instrument for astronaut mass measurement", Trans. Jpn. Soc. Aeronaut. Space Sci., Vol.50, No.170, pp.251–257, 2008.
  35. Y. Fujii, K. Shimada, M. Yokota, S. Hashimoto, Y. Sugita, H. Ito, "Mass measuring instrument for use under microgravity conditions", Rev. Sci. Instrum., Vol.79, No.5, 056105, 2008.
  36. Y. Fujii, "Toward establishing dynamic calibration method for force transducers", IEEE Trans. Instrum. Meas., Vol.58, No.7, pp.2358–2364, 2009.
  37. Y. Fujii, J.P. Hessling, "Frequency estimation method from digitized waveform", Exp. Tech., Vol.33, No.5, pp.64–69, 2009.
  38. H. Ito, Y. Fujii, "Evaluation of mechanical response of human palm to small impact force", Electron. Commun. Jpn., Vol.92, No.1, pp.18–23, 2009.
  39. Y. Fujii, K. Shimada, K. Maru, "Instrument for measuring the body mass of astronauts under microgravity conditions", Microgravity Sci. Technol., Vol.22, No.1, pp.115–121, 2010.
  40. A. Takita, H. Ebara, Y. Fujii, "Dual beat-frequencies laser Doppler interferometer", Rev. Sci. Instrum., Vol.82, 123111, 2011.
  41. T. Jin, A. Takita, S. Mitatha, P.P. Yupapin, H.Z. Jia, W.M. Hou, Y. Fujii, "Method for acceleration measurement using a laser Doppler interferometer", Meas. Sci. Technol., Vol.24, No.7, 077001, 2013.
  42. N. Miyashita, K. Watanabe, K. Irisa, H. Iwashita, R. Araki, A. Takita, T. Yamaguchi, Y. Fujii, "Software for correcting the dynamic error of force transducers", Sensors, Vol.14, No.7, pp.12093–12103, 2014.
  43. R. Araki, A. Takita, T. Ishima, H. Kawashima, N. Pornsuwancharoen, S. Punthawanunt, E. Carcasona, Y. Fujii, "Impact force measurement of a spherical body dropping onto a water surface", Rev. Sci. Instrum., Vol.85, 075108, 2014.

Other publications: http://www.e-jikei.org/fujii/fujii.htm

← Previous: 9. Measurement Techniques | Next: 11. Contact →

Contents

The Levitation Mass Method: precision force measurement by the definition of force | Yusaku Fujii (Gunma University)